• Roof Material
  Heavy PVC
• Roof Material Weight
  650 g/m²
• Sidewall Material
  Steel
• Frame
  Aluminium
• Colour
  White
• Fire Safety
  EN 13501-1+A1:2010
• Construction according to
  EN 1090-2:2008+A1:2011, EN 1090-1:2009+A1:2011
• Side Height (m)
  3.5
• Product Number
  ST132440
• Snow Load (kg/m²)
  20
• Weight (kg)
  1
• Ridge Height (m)
  6.53
• Wind Load (km/h)
  100
• UV-resistant
  UV-resistant
• Water Resistance
  100% Waterproof

5 m extension for industrial strength storage shelterSidewalls in single trapezoidal steel sheetsRoof cover in heavy duty PVCTranslucent PVC for light inside hall during the dayExtremely strong frame with aluminium profilesFire retardant 650 g/m² PVC roof cover according to EN 13501-1Designed and manufactured in EuropeThe storage shelter is manufactured according to CE/EN standardsSmart construction for quick assemblyRoof pitch: 22⁰Snow load: 20 kg/m2Wind load: 28 m/sPlease note: The extension must be ordered together with the industrial storage shelter!The industrial strength storage hall is the perfect solution for any business in need of a functional, flexible, and temporary storage building. Dancover offers a top of the line storage hall designed and produced in Europe with a strong, durable aluminium frame and single trapezoidal steel sheets as sidewalls and a heavy duty, flame retardant roof cover in 650 g/m2 PVC. The cover is fire retardant and certified according to EN 13501-1.A functional, economic attractive alternative to permanent structures with an intelligent construction for quick assembly. The storage hall can be used all year round and can be disassembled and moved if necessary.The storage building shown here with mentioned price is designed for areas in 20kg/m2 snow zones and with a wind load of 28 m/sec.Additional charge for higher snow load! You can have the storage building delivered for an area with a higher snow load for an additional charge. We offer i.e. 100kg/m2 or 200kg/m2 and more. Please contact us for an estimate. Cost of freight is calculated separately and will be send on a separate invoice.Please note: the illustrations are for inspiration and minor details may vary.

Safety Advice


Condensation
Note: Temperature changes and moisture in the air can cause dew or condensation to appear outside and inside a marquee. This is normal and does not mean the marquee is leaking.


In some countries, approval is needed to set up a tent larger than 75 m².


In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.
Your tent is intended as a temporary form of coverage. It is to be used on an occasional and non-permanent basis only.
When it rains, a risk emerges that water pile up on the roof of your tent and causes the tent to collapse. It is your responsibility to keep the roof cover free of water. Be sure that it is fully extended and please remove standing water that builds up during rainfall.
When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.
Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.
Do not pack or unpack your tent at subzero temperatures. Doing so can cause crazing – especially to tent windows in sidewalls.
Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.
Please note that the warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.
We recommend you to check whether your tent is covered by your home contents insurance.